SPC Flooring Supplier in Selangor for Contractors and Project Buyers
We supply three listed SPC interlocking flooring ranges from Subang Jaya, Selangor: 4.6mm NanoSPC, 6mm SPC and 8+2mm LamiSPC. Each range has different plank dimensions and carton coverage, allowing contractors, interior designers and project buyers to compare options before ordering.
Start by choosing the appropriate flooring range and design code. Then contact us to confirm the required quantity, current availability, pricing and fulfilment arrangements for your project.
Whether you are sourcing flooring for one renovation or coordinating materials across multiple units, we help you begin with identifiable product ranges and published packing information rather than a generic SPC flooring request.
Which SPC flooring ranges can we supply?
Our published SPC flooring selection includes three interlocking plank categories. The main differences you can compare immediately are the stated overall thickness, plank dimensions and floor coverage per carton.
| SPC Flooring Range | Published Plank Size | Packing | Coverage / Carton |
|---|---|---|---|
| 4.6mm NanoSPC Interlocking Flooring | 1220 Ă— 184mm | 10 planks | 24.16 sq ft |
| 6mm SPC Interlocking Flooring | 1220 Ă— 184mm | 8 planks | 19.33 sq ft |
| 8+2mm LamiSPC Interlocking Flooring | 1500 Ă— 230mm | 4 planks | 14.85 sq ft |
Specifications and coverage are based on the published category information. Confirm the exact selected product code and applicable specifications before committing to an order.
4.6mm NanoSPC NFS469 Grey Clio Oak — one of the listed designs in our NanoSPC selection.
6mm SPC NFS601 Light Finc Ash — a light wood-look design in our 6mm SPC range.
8+2mm LamiSPC NFLS106 Terra Vlif Walnut — a darker wood-grain option in our LamiSPC range.
Why compare by product code? A precise design reference helps everyone involved in the project work from the same material selection. We recommend recording the range and code in the flooring schedule before confirming quantities or commercial terms.
Which SPC flooring range fits the project brief?
The right choice depends on the project requirements, not simply on selecting the thickest plank. Our published dimensions and design ranges provide a useful starting point, while the exact product specification and installation conditions determine suitability.
For example, both our 4.6mm NanoSPC and 6mm SPC ranges list 1220 Ă— 184mm planks, whereas the 8+2mm LamiSPC range lists a larger 1500 Ă— 230mm plank footprint.
These differences can affect the proposed visual layout and floor-height planning. They do not, by themselves, establish the wear resistance, backing construction or suitability for a particular application.
What should you confirm before selecting?
- Overall thickness: Check available floor height and adjoining finishes.
- Plank size: Review the intended flooring pattern and room proportions.
- Design code: Record the exact colour or décor reference.
- Intended use: Identify residential, commercial or other project conditions.
- Technical documentation: Check wear layer, backing, subfloor and installation requirements for the specific product.
The NFS461 Grey Hem Brissago design shows how a lighter wood-look décor can be considered alongside the project's existing walls, doors and interior finishes.
SPC flooring selection matrix
| Selection Factor | What You Can Compare | What Still Needs Confirmation |
|---|---|---|
| Flooring thickness | 4.6mm, 6mm and 8+2mm listed ranges | Finished floor height and transition requirements |
| Plank dimensions | 1220 Ă— 184mm or 1500 Ă— 230mm | Layout suitability, cutting and finishing details |
| DĂ©cor selection | Published colour images and design codes | Appearance in project lighting and current availability |
| Product performance | Specific product documentation where available | Wear layer, backing, application and installation requirements |
What should wholesale or multi-unit buyers compare across suppliers?
For SPC flooring wholesale in Selangor, a useful comparison should be based on matching product specifications, order quantities and supply terms. Comparing price alone can be misleading when the quoted items or coverage differ.
| Comparison Item | What Buyers Should Check | Why It Matters |
|---|---|---|
| Exact product and specification | Range, décor code, overall thickness, dimensions and relevant technical details. | Ensures the comparison concerns the same specified material or an accurately documented alternative. |
| Coverage and carton count | Published area per carton and total whole cartons required. | Prevents inconsistent quantity assumptions when comparing offers. |
| Stock and order timing | Availability of the selected colour and code for the actual quantity and required date. | Helps align material procurement with the project schedule. |
| Supply scope and price | Material price and whether delivery, accessories, floor preparation or installation items are included separately. | Allows a more meaningful comparison of total project procurement costs. |
What do we provide for project buyers?
Through Novafloor Protection, we list SPC interlocking flooring ranges with published plank dimensions, product design codes and carton coverage information.
Our broader Malaysian supply offering includes ready-stock and wholesale-pricing options, along with custom-make options where applicable. For SPC flooring project supply, please confirm the actual product code, requested quantity, relevant customization scope, price and fulfilment terms with our team.
We recommend that contractors and flooring companies compare quotations based on their complete material schedules, especially when purchasing for several rooms, floors or property units.
Compare the complete supply requirement.
A price per square foot is most useful when the product code, carton coverage, order quantity and included commercial items have been clearly identified.
Before confirming an order, clarify any additional items and project-specific requirements rather than assuming they are included in the flooring material price.
How does carton coverage affect an SPC flooring project order?
Each of our three listed SPC ranges covers a different floor area per carton. Consequently, the same room area will not require the same number of cartons across all three ranges.
Published coverage helps buyers prepare an initial whole-carton material estimate. This is particularly useful when comparing possible selections during early project budgeting.
- 4.6mm NanoSPC: 24.16 sq ft per carton.
- 6mm SPC: 19.33 sq ft per carton.
- 8+2mm LamiSPC: 14.85 sq ft per carton.
The selected design code should be finalized before carton quantities and order availability are confirmed.
Example: 500 sq ft using 6mm SPC
Our 6mm SPC category lists 19.33 sq ft of flooring per carton.
500 Ă· 19.33 = approximately 25.87 cartons.
Rounding up gives 26 whole cartons, representing approximately 502.58 sq ft of published nominal coverage.
This is a coverage-only example, not a final purchase quantity. The installer or project team should assess cuts, room geometry, layout, contingency requirements and product-specific instructions before confirming the order.
What needs a site-specific check before SPC flooring is ordered?
Although SPC interlocking flooring uses a plank joining system, a suitable installation still depends on actual site conditions. Material selection should therefore consider the room, subfloor and finishing details—not only the preferred colour.
Practical site checks
-
Subfloor flatness
Identify uneven areas and check the selected product's permitted substrate tolerances.
-
Dryness and moisture conditions
Confirm whether the existing substrate and site conditions meet the applicable installation requirements.
-
Finished floor height
Check door clearance, thresholds, skirting and transitions to neighbouring flooring.
-
Edges and finishing details
Review required movement allowances, finishing profiles and junctions according to the product instructions.
Connect the product specification to the real site.
For example, a project with limited clearance beneath existing doors may need additional attention to finished floor thickness and transition details before a product is selected.
Likewise, where the substrate is uneven or affected by moisture, the responsible installer should establish whether corrective work is needed under the selected product's instructions.
The installer or responsible project team should verify the product documentation, substrate conditions and installation requirements before purchasing or beginning work.
When enquiring with us, include any known site constraints so the product discussion is based on the actual project requirements.
What can you decide from a design image, and what needs a real sample?
Product images help buyers narrow down preferred colours, patterns and wood-look finishes. However, photographs and digital screens can show colours differently depending on display settings, lighting and the surrounding interior.
Our published décor images, such as the NFS601 Light Finc Ash option shown here, can help you shortlist a particular appearance and identify its product code.
How should you assess the final décor?
Where a physical sample is available, compare it in the intended room lighting and alongside wall colours, cabinetry, doors and adjacent floor finishes.
A sample is useful for evaluating appearance, but it does not confirm wear resistance, technical suitability, order availability or installation compatibility. Those details require the relevant product specification and confirmation for the intended order.
For designers and contractors: Record the final selected range and décor code in the project material schedule. This helps reduce ambiguity between the proposed design, purchasing request and actual order.
How do you start an SPC flooring supplier enquiry?
Contact our team with the selected SPC range, preferred design code and essential project requirements. This allows us to discuss the relevant product and applicable commercial terms without relying on incomplete material descriptions.
What information should you send us?
-
Selected flooring range and code
For example, 4.6mm NanoSPC NFS469 or another published product reference.
-
Approximate floor area
Provide the estimated area in square feet or square metres, along with any available floor plan.
-
Project location and required date
State the project location and when the material will be needed.
-
Special order or site requirements
Include multi-unit quantities, relevant customization requests, site constraints or other items needing clarification.
Project procurement starts with an accurate product brief.
Our Subang Jaya contact location provides a point of enquiry for contractors, flooring companies, developers and interior designers sourcing SPC flooring in Selangor and elsewhere in Malaysia.
With the required range, code and quantity identified, we can discuss product details, availability, wholesale terms and the relevant order requirements.
SPC Flooring Supplier FAQs
Common questions from buyers comparing SPC flooring material for renovation, fit-out and multi-unit projects.
Do you supply SPC flooring wholesale in Selangor?
We list three SPC flooring ranges and have a broader wholesale supply offering in Malaysia. For wholesale enquiries, please provide the selected product code and required quantity so availability, pricing and order terms can be confirmed.
What is the difference between 4.6mm NanoSPC, 6mm SPC and 8+2mm LamiSPC?
Their published overall thicknesses, plank dimensions and carton coverage differ. The NanoSPC and 6mm SPC categories list 1220 Ă— 184mm planks, while LamiSPC lists 1500 Ă— 230mm planks. Technical suitability should be checked against the exact product specification.
Can I confirm the price of SPC flooring per square foot online?
This page does not publish a fixed SPC flooring price list. Please enquire with the selected product code, approximate area and project requirements to discuss applicable supply pricing and terms.
Are all SPC colours and designs available immediately?
Availability should be confirmed for the specific décor code, quantity and required date. A listed product design should not be treated as guaranteed ready stock for every project order.
Can contractors and buyers outside Selangor enquire?
Yes. Buyers across Malaysia may contact our team about the listed SPC flooring ranges. Any delivery arrangements, order timing and applicable fulfilment terms should be discussed for the specific project location.
Ready to enquire about SPC flooring in Selangor?
In summary, our three listed SPC interlocking ranges give contractors, interior designers and project buyers a clear starting point for comparing plank dimensions, décor codes and carton coverage.
Choose your preferred range, estimate the required floor area and contact Koma Supply Sdn Bhd to discuss the selected SPC material, quantity, availability and commercial terms.
Koma Supply Sdn Bhd
Lot 776-B, Jalan Subang 4,
Taman Perindustrian Sungai Penaga,
47500 Subang Jaya, Selangor, Malaysia.
Before contacting us
Please prepare:
- SPC range and décor code
- Approximate floor area
- Project location
- Required material date
- Special order requirements, if any
These details help keep the discussion focused on the exact flooring material your project requires.