Floorgard Basic, Plus+ or Pro: Which Series Fits Your Renovation?
Choose your Floorgard Mat series according to the manufacturer's intended work scope and approximate renovation duration first. Then check the exact series and thickness we can currently supply.
Floorgard Basic vs Plus+ vs Pro is not simply a comparison of thickness. Each series has a different material construction and intended renovation application, even where thickness options overlap.
At Koma Supply Sdn Bhd in Subang Jaya, Selangor, we supply genuine Floorgard Mat. This guide helps interior designers, renovation contractors and developers identify the right manufacturer series to ask about before placing an order.
Our Novafloor floor covering demonstrates the roll-based protection format used during renovation preparation. Floorgard has its own distinct series specifications.
Basic is positioned for shorter, lighter work; Plus+ for ceiling and joinery activities over several months; and Pro for major renovation work with heavier traffic. The manufacturer's suggested durations help shortlist a series, but do not guarantee how long it will perform at your site.
Basic, Plus+ and Pro at a Glance
HANER ECO SDN BHD positions the three Floorgard Mat series for different renovation conditions. The comparison below brings together the manufacturer's stated work applications, suggested project durations, thickness options and layer constructions.
| Floorgard Series | Typical Work | Manufacturer Suggests | Thickness Options | Layer Construction |
|---|---|---|---|---|
| Basic | Short-duration, light renovation, temporary work and joinery installation | Less than 3 months | 1.5mm | PE tarpaulin canvas + PE foam |
| Plus+ | Ceiling work, joinery installation and moderately demanding renovation activities | 2–6 months | 1.5mm or 3mm | PE tarpaulin canvas + EVA foam |
| Pro | Major renovation, extensive work scopes and heavier site traffic | 3–12 months | 1.5mm or 3mm | OPP + tarpaulin canvas + EVA foam |
The key purchasing lesson: an order requesting only "Floorgard 3mm" is incomplete because both Plus+ and Pro are described with 3mm options. Include the series name and thickness together to reduce the risk of receiving a quotation for a different specification.
Match the Series to the Work Being Done
The most useful starting point is the nature of the renovation—not simply the project name or the thickness printed on a purchase request. Consider which trades will work over the protected floor, how frequently the area will be used and the expected work schedule.
Short Joinery or Temporary Work
Imagine a small interior alteration involving light cabinet adjustments, minor joinery installation or a brief finishing stage expected to take a few weeks.
The manufacturer positions Basic for light work and projects lasting less than three months. That makes it a reasonable first series to enquire about for this example, provided the actual site conditions suit the specification.
Several Months of Ceiling and Joinery Work
Consider a commercial unit renovation where ceiling installation, partitions, built-in furniture and other finishing activities continue for approximately four months.
Plus+ aligns with the manufacturer's description of ceiling and joinery work and its suggested two-to-six-month project range. The 1.5mm and 3mm options should then be compared using the actual product specification.
Major Renovation with Heavier Movement
For a more extensive property renovation, the protected floor may be crossed repeatedly by multiple trades, tools, materials and equipment over a longer period.
The manufacturer positions Pro for major work scopes and heavier traffic, with a suggested three-to-twelve-month project range. This makes Pro the relevant initial shortlist when the renovation is more demanding.
Staircases and shared access routes need separate consideration because movement, edges and layout can differ from open floor areas.
How we can help: once you have identified a likely series, send us the exact Floorgard name or a brief description of the planned work. We can discuss which genuine Floorgard version is available for your order. These examples are selection guides, not substitutes for your project team's assessment of the site.
Why the Same Thickness Can Still Mean a Different Product
Both Floorgard Plus+ and Floorgard Pro are listed in 1.5mm and 3mm versions. Their layer constructions, however, are not identical.
Plus+ combines PE tarpaulin canvas with EVA foam. Pro uses OPP, tarpaulin canvas and EVA foam. The manufacturer also assigns the two series to different intended work scopes.
This means a 3mm Plus+ request and a 3mm Pro request are not automatically equivalent. Thickness is only one part of the product specification.
When preparing a material schedule or purchase order, identify both the series name and thickness. This gives your purchaser, contractor and supplier a clearer reference and reduces uncertainty when comparing quotations.
Our separate Novafloor product range illustrates why brand and product identity matter when ordering protective rolls. It must not be substituted for a Floorgard specification based on thickness alone.
Floorgard Plus+
Manufacturer-listed layer construction
Thickness: 1.5mm or 3mm
Positioned for: ceiling and joinery work.
Floorgard Pro
Manufacturer-listed layer construction
Thickness: 1.5mm or 3mm
Positioned for: major work and heavier traffic.
Simplified comparison of the manufacturer's stated material layers; not a scale drawing, performance test or cross-sectional measurement.
Specify the Complete Product, Not Just the Number
A purchasing description such as "Floorgard Pro, 3mm" is more precise than "3mm protection mat". It identifies the brand, the intended manufacturer series and the requested thickness before quantity and delivery requirements are discussed.
What the Manufacturer's Suggested Duration Does and Does Not Tell You
The project durations for Basic, Plus+ and Pro are manufacturer-suggested selection ranges. They describe how the series are positioned for different renovation schedules, rather than a guaranteed product lifespan.
For example, a four-month renovation may initially point towards Plus+. But project length alone does not establish whether the covering suits the movement of materials, the type of finished floor or the work being carried out.
Equally, a shorter project with frequent heavy movement should not automatically be treated as light work simply because it lasts less than three months.
Use the duration range alongside the manufacturer's intended work scope. Ask for the specific Floorgard series and thickness that matches your planned purchasing requirement.
Consider These Site Conditions
- Floor finish: what type of surface will be covered, and does it have special protection requirements?
- Traffic and movement: will workers, equipment or building materials pass repeatedly over the covering?
- Debris and work activities: could dust, loose particles or sharp objects collect on or beneath the covering?
- Changing trades: will the work intensity or protected areas change during the renovation?
- Inspection and upkeep: who will check loose edges, damaged sections and the condition of the covering?
Manufacturer Guidance Is Not a Site Guarantee
A suggested duration should not be interpreted as a promise of scratch-proof results, a waterproof performance rating, certified anti-slip behaviour or a guaranteed period of effective use.
Our separate Novafloor rolls are shown here to illustrate the importance of identifying the exact named product before purchase. The Floorgard manufacturer's own series descriptions remain the appropriate reference for a Floorgard enquiry.
The practical approach is to match the specified Floorgard version to the intended work, confirm the ordering details and arrange suitable site monitoring while protection is in use.
Choose the Named Version Before Checking Availability
Once you have shortlisted Basic, Plus+ or Pro, the next step is to confirm which genuine Floorgard Mat version we can supply for your project.
We supply genuine Floorgard Mat through Koma Supply Sdn Bhd in Subang Jaya. Exact series availability, thickness options, quantities and fulfilment dates must be checked for each enquiry.
What to Include in Your Enquiry
Providing the following details helps us identify the product you are requesting and discuss the relevant supply options.
- Floorgard series: Basic, Plus+ or Pro.
- Requested thickness: 1.5mm or 3mm, where offered in the named series.
- Quantity: number of rolls required or a material schedule for discussion.
- Project location: the site address or area in Selangor, or your actual project destination.
- Required date: when the material must be available for your renovation schedule.
A Clearer Request for Floorgard Mat
We are planning a four-month renovation involving ceiling and joinery work in Selangor. We would like to enquire about genuine Floorgard Plus+, preferably 3mm, for an estimated quantity of 20 rolls. Please confirm the available series and thickness, quotation and supply arrangements for our required project date.
This is an illustrative request, not a statement that Floorgard Plus+ 3mm or the example quantity is currently in stock.
Do not confuse the two ranges. Our Novafloor 1mm, 2mm and 3mm protection products have their own specifications. A request for genuine Floorgard Basic, Plus+ or Pro should identify Floorgard explicitly so the two product ranges are not mixed in the same purchase specification.
Frequently Asked Questions About Floorgard Mat
These answers address the main series-selection and ordering questions for contractors, designers and renovation buyers in Malaysia.
What is the main difference between Floorgard Basic, Plus+ and Pro?
The main differences are intended work scope, suggested project duration and material construction. Basic is positioned for shorter, lighter jobs; Plus+ for ceiling and joinery work; and Pro for major renovation and heavier traffic.
Is Floorgard Plus+ 3mm the same as Floorgard Pro 3mm?
No. Although both series have manufacturer-listed 3mm options, Plus+ uses PE tarpaulin canvas and EVA foam, while Pro adds an OPP layer to its tarpaulin canvas and EVA foam construction. They are positioned for different work scopes.
Does the suggested renovation duration guarantee how long Floorgard will last?
No. The suggested ranges are manufacturer selection guidance, not guaranteed lifespans. Actual conditions depend on floor finishes, site traffic, debris, equipment movement, handling and ongoing upkeep.
Does Koma Supply stock every Floorgard series and thickness?
We supply genuine Floorgard Mat, but availability of individual Basic, Plus+ and Pro versions and thicknesses must be confirmed when you enquire. We cannot assume that every manufacturer-listed option is available for immediate supply.
What details should I send to request genuine Floorgard Mat?
Send the preferred series, thickness, quantity, project location and required date. If you have not chosen a series, include the renovation work scope and expected duration so the product enquiry can be discussed more clearly.
Ready to Specify Floorgard for Your Renovation?
Tell us which Floorgard series you need, your preferred thickness and when your project requires the material.
From our Subang Jaya base, we can discuss your genuine Floorgard Mat supply enquiry and confirm the available product version and ordering arrangements for your project.
If your purchase specification is not final, share the planned work and expected renovation duration so we can discuss the relevant series request.
Enquire About Genuine Floorgard MatIn summary, choose Floorgard Basic, Plus+ or Pro based on the manufacturer's intended renovation application and suggested duration, then specify the exact series and thickness. We can help you turn that decision into a clear product enquiry with Koma Supply Sdn Bhd.
Before You Contact Us
Prepare these details for a more precise enquiry:
- Floorgard Basic, Plus+ or Pro
- Requested thickness
- Roll quantity
- Project location in Selangor or elsewhere
- Required supply date
- Brief work scope if the series is undecided
Koma Supply Sdn Bhd
Subang Jaya, Selangor, Malaysia