Floor Protection Sheet Supplier Malaysia: A Complete Trade Buyer's Guide
Looking for a reliable floor protection sheet supplier in Malaysia? Novafloor Protection supplies temporary floor and surface protection rolls in 1mm, 2mm and 3mm thickness options, with a standard listed roll size of 1,160mm wide × 12m long and approximately 150 sq ft of nominal coverage per roll.
Our floor protection material features an OPP + PE + canvas + EVA rubber construction designed for temporary protection during renovation, construction and interior installation work. Explore our Novafloor floor protection product range to compare the available options.
Choosing the right renovation floor protection involves more than comparing prices or material thickness. Contractors, interior designers, property developers, flooring installers and renovation companies should also consider the floor finish, work activities, protection period, roll coverage and installation requirements.
This guide explains our floor protection specifications, how to compare thickness options, how to estimate roll quantities, which accessories to consider and what information to prepare when requesting a quotation in Malaysia.
What Is a Floor Protection Sheet?
A floor protection sheet is a temporary covering placed over an existing or newly installed floor to help protect its surface while renovation, construction or interior work takes place. Depending on the product, floor protection materials may be supplied as flexible rolls, individual sheets or rigid boards.
Our Novafloor Protection products are supplied in roll format, making them suitable for planning coverage across rooms, corridors and designated work areas.
Temporary floor protection is commonly considered for projects involving:
- Residential home renovation and refurbishment.
- Office renovation and commercial interior fit-outs.
- Cabinetry, carpentry and built-in furniture installation.
- Painting and interior finishing activities.
- Flooring installation and subsequent renovation work.
- Contractor access routes and material movement areas.
- Property upgrading and handover preparation.
The appropriate protection system depends on the flooring material, the type of work being carried out and the conditions at the project site.
Novafloor Floor Protection Sheet Specifications
Before comparing floor protection suppliers in Malaysia, check the actual product specifications. Products marketed as floor protection sheets may have different materials, dimensions, thicknesses and installation requirements.
Our Novafloor Protection range includes the following published specifications.
| Specification | Novafloor Protection |
|---|---|
| Product type | Temporary floor and surface protection |
| Product format | Roll |
| Available thicknesses | 1mm, 2mm and 3mm |
| Material construction | OPP + PE + canvas + EVA rubber |
| Roll width | 1,160mm (1.16m) |
| Roll length | 12 metres |
| Nominal coverage | 13.92m² (approximately 150 sq ft) per roll |
| Primary application | Temporary floor and surface protection during renovation and interior works |
Understanding the Material Construction
Our floor protection material combines OPP, PE, canvas and EVA rubber in a layered construction.
These material components are relevant when comparing flexible protection rolls with other temporary floor covering products.
However, material names alone do not establish a specific impact-resistance rating, slip-resistance value or compatibility with every floor finish.
Where a project has particular technical requirements, such as protection against defined loads, equipment movement or exposure conditions, the selected product should be evaluated against those requirements before installation.
1mm vs 2mm vs 3mm Floor Protection: Which Should You Choose?
The best floor protection thickness depends on the floor finish, expected site activities and protection requirements. A thicker material should not automatically be treated as suitable for every type of construction activity.
We offer three listed thickness options so customers can review their requirements before selecting a product.
1mm Novafloor Protection
Our 1mm option is available for projects where this thickness meets the specified floor protection requirements.
Consider the floor condition, work activities and expected handling before selecting it.
View 1mm Protection2mm Novafloor Protection
Our 2mm option provides another thickness choice for temporary floor protection planning.
Review the intended work environment, flooring material and required protection period before ordering.
View 2mm Protection3mm Novafloor Protection
Our 3mm option is available where a thicker protection material is being considered for the project.
Confirm suitability for the expected loads, site activities and flooring conditions rather than relying on thickness alone.
View 3mm ProtectionWhat Should You Consider Before Selecting a Thickness?
To help us understand your requirements, prepare the following project information:
- Flooring material: Identify whether the surface is tile, vinyl, SPC flooring, laminate, timber, marble or another floor finish.
- Floor condition: Explain whether the floor is newly installed, fully cured, occupied or undergoing renovation.
- Work activities: Describe painting, cabinetry installation, carpentry, furniture movement or other construction activities.
- Site traffic: Identify pedestrian routes, equipment movement, delivery access and material handling areas.
- Protection duration: Estimate how long the temporary covering will remain installed.
- Special requirements: Mention any specified performance criteria, installation restrictions or flooring manufacturer recommendations.
Where Can Temporary Floor Protection Be Used?
Temporary floor protection is relevant to many residential, commercial and interior renovation projects. The protection method should be selected around the actual work being carried out.
Residential Renovation
Home renovation projects may require protection for living rooms, bedrooms, corridors and other completed flooring areas while contractors continue working.
Before installation, identify the floor finish and determine whether the covering is compatible with the surface condition.
Office and Commercial Interior Works
Office renovation and commercial fit-out projects often involve multiple trades working within shared access areas.
Protection planning should consider the main working zones, corridors, entry points and routes used to transport materials.
Flooring Installation Projects
Flooring contractors may need temporary protection after installation while other interior works continue.
This is particularly important where completed flooring will be exposed to subsequent trades. Always confirm that the flooring system is ready to be covered.
Painting and Interior Finishing
Painting, wall finishing and cabinetry installation can create situations where floors and nearby surfaces require temporary covering.
Depending on the work, protection rolls may need to be planned alongside masking materials, edge protection and other accessories.
Customers planning flooring and renovation work can also explore our flooring and surface protection products when preparing their material requirements.
How Many Floor Protection Rolls Do You Need?
To estimate the number of floor protection rolls, divide the total floor area requiring protection by the nominal coverage per roll, then round up and allow for cutting, overlaps and site layout.
Our listed Novafloor Protection roll dimensions are:
Roll Width × Roll Length
1.16m × 12m = 13.92m²Approximately 150 sq ft per roll
Step 1: Measure the Area Requiring Protection
Measure the length and width of each area that needs temporary floor covering.
For a rectangular space:
For projects with several rooms or irregular layouts, calculate the relevant areas separately and add them together.
Step 2: Calculate the Starting Roll Quantity
Divide the measured protection area by 13.92m² per roll.
Step 3: Allow for Installation and Cutting
The calculation provides a starting quantity, not necessarily the final order quantity.
Additional material may be needed for:
- Overlapping joints between adjacent rolls.
- Cutting around columns and fixed structures.
- Narrow corridors and irregular room shapes.
- Separate work zones and access routes.
- Steps, entrances and additional protection areas.
- Material wastage during installation.
Example: Floor Protection for a 100m² Project
Consider a hypothetical renovation project requiring temporary floor protection across 100m².
| Total protection area | 100m² |
|---|---|
| Nominal coverage per roll | 13.92m² |
| Initial calculation | 100 ÷ 13.92 |
| Calculated quantity | Approximately 7.18 rolls |
| Starting order estimate | 8 rolls |
For larger or more complicated projects, provide a floor plan with dimensions and highlight the areas requiring protection. This helps establish a more practical material estimate before ordering.
Floor Protection Installation and Maintenance Considerations
Correct installation planning is important when using temporary floor protection. The floor condition, joining method and ongoing site activities should all be considered.
Before Installing Floor Protection
- Inspect the floor: Check the existing condition and identify any sensitive or newly installed surfaces.
- Confirm covering suitability: Follow the relevant flooring manufacturer's instructions, particularly for curing, moisture and ventilation requirements.
- Remove loose debris: Prepare the floor in accordance with the flooring manufacturer's cleaning recommendations.
- Plan the roll layout: Determine the direction of installation, coverage zones and locations of joints.
- Check joining materials: Confirm the appropriate tape or joining method before installation.
During Renovation Work
Temporary floor protection should be inspected as work progresses.
Pay attention to damaged sections, displaced material, exposed flooring, accumulated debris and joints that may require attention.
Where equipment, heavy materials or concentrated loads are involved, assess whether additional protection measures are required.
When Removing the Protection
Remove temporary protection carefully and follow the relevant flooring manufacturer's cleaning and maintenance instructions.
If tape or other joining accessories have been used, check their removal requirements and surface compatibility.
Floor Protection Accessories to Consider
A complete floor protection order may require more than protection rolls. Depending on the site, accessories may be needed for joints, edges and nearby surfaces.
Our Novafloor product range includes masking tape, cloth tape, L-corner protection and masking film with tape.
| Accessory | Listed Size | What to Consider |
|---|---|---|
| Masking Tape | 48mm × 13m | Check the intended application, adhesive compatibility and removal requirements. |
| Cloth Tape | 48mm × 25m | Confirm suitability for the intended joining or securing method and contact surfaces. |
| L-Corner Protection | 50mm × 50mm × 1m, 5mm thickness | Consider exposed corners and edges that may need separate protection. |
| Masking Film With Tape | 3m high × 10m long | Consider nearby surfaces requiring temporary masking during painting or interior finishing. |
Masking Film With Tape
Masking film with tape can be considered when planning temporary protection for nearby surfaces during painting and interior finishing work.
Our listed masking film with tape measures 3 metres high by 10 metres long.
View our masking film with tape product or browse the complete Novafloor Protection range when preparing your purchasing list.
How to Choose a Floor Protection Sheet Supplier in Malaysia
When selecting a floor protection supplier, compare product specifications, order quantities, available accessories, delivery arrangements and total purchasing cost.
For contractors and trade buyers, a clear quotation helps reduce confusion when comparing different suppliers or product options.
1. Compare Equivalent Product Specifications
Make sure the quotations refer to comparable materials and dimensions.
A lower price per roll may not represent a lower material cost if the roll is narrower, shorter or made from a different material construction.
2. Check Roll Coverage
Compare the width and length of each product using the same units.
For products sold by the roll, calculating the nominal cost per square metre provides a useful starting comparison.
This calculation excludes overlaps, cutting allowances, installation accessories and delivery costs.
3. Confirm the Required Thickness and Quantity
Check that the supplier can provide the selected thickness in the quantity required for your project.
Our Novafloor Protection range includes 1mm, 2mm and 3mm options. We recommend confirming the exact specification and quantity when requesting a quotation.
4. Check Stock and Delivery Arrangements
We offer ready-stock supply options, wholesale pricing and custom-made options across our product offering.
For project purchasing, confirm current stock allocation, required quantity, delivery destination and requested delivery date.
If customisation is required, describe the requested dimensions, material requirements, quantity and other relevant specifications so that the enquiry can be evaluated.
5. Compare the Complete Quotation
The total purchasing cost may include protection rolls, accessories, delivery charges and applicable taxes.
Comparing the full quotation provides a more meaningful basis for making a purchasing decision.
Floor Protection Supplier Quotation Comparison Checklist
Use the following checklist when comparing floor protection quotations for renovation, construction or commercial interior projects.
| Quotation Item | What to Compare |
|---|---|
| Product Material | Confirm the stated material construction and product format. |
| Thickness | Compare the same specified thickness where equivalent products are required. |
| Roll Dimensions | Check roll width and length using consistent measurement units. |
| Coverage | Calculate nominal coverage and allow for installation wastage. |
| Order Quantity | Confirm sufficient rolls for the measured areas and site layout. |
| Accessories | Identify included accessories and items purchased separately. |
| Stock Availability | Confirm the required thickness and quantity for the intended order date. |
| Delivery | Confirm the delivery destination, charges and arrangements. |
| Custom Requirements | State any requested variations and confirm their feasibility and lead time. |
| Total Cost | Compare product costs, accessories, delivery and applicable taxes. |
Explore Our Novafloor Floor Protection Range
Our temporary floor protection range includes 1mm, 2mm and 3mm protection rolls for renovation and interior work planning.
Each thickness option should be selected according to the intended application and project requirements.
Temporary floor protection roll available in our 1mm product range.
Novafloor protection roll displayed on a covered floor surface.
Novafloor branded floor protection rolls available in our 3mm product range.
For detailed product information, visit our 1mm, 2mm and 3mm Novafloor Protection collection .
How to Request a Floor Protection Quotation in Malaysia
To request a floor protection quotation, provide the project location, floor type, protection area, preferred thickness, estimated quantity and required delivery date.
Clear project information helps us understand your requirements and prepare a more relevant response.
Information to Prepare Before Contacting Us
- Project location: State the delivery address or project area in Malaysia.
- Project type: Identify whether the work involves residential renovation, commercial fit-out, flooring installation or another application.
- Floor finish: Specify the flooring material and whether it is newly installed.
- Protection area: Provide the total area in square metres or square feet.
- Floor plan: Include drawings or measurements where available, especially for complicated layouts.
- Work activities: Describe the renovation activities, equipment movement and expected site conditions.
- Preferred thickness: Indicate 1mm, 2mm or 3mm if already specified.
- Estimated quantity: State the required number of rolls or request assistance reviewing your material estimate.
- Accessories: Mention masking tape, cloth tape, corner protection or masking film if required.
- Delivery schedule: Provide the intended delivery date and any relevant site access details.
- Custom requirements: Describe any requested material, dimensional, quantity or other project-specific requirements.
Need Floor Protection Materials for Your Next Project?
Whether you are purchasing temporary floor protection for a home renovation, office fit-out or contractor project, our team can assist with enquiries about our available protection products and accessories.
Share your floor type, required area, preferred thickness, quantity and delivery details so we can discuss the relevant product options.
Request a Floor Protection Quotation
Novafloor Protection | Koma Supply Sdn Bhd
Subang Jaya, Selangor, Malaysia
Frequently Asked Questions About Floor Protection Sheets
Here are answers to common questions from contractors, renovation companies and other buyers looking for temporary floor protection materials in Malaysia.
Floor protection sheets and rolls serve similar temporary covering purposes, but their formats can differ.
Individual sheets are supplied in separate pieces, while floor protection rolls contain continuous material that can be cut to suit the required area. Our Novafloor Protection products are supplied in roll format.
The appropriate thickness depends on the flooring material, renovation activities, expected traffic and protection requirements.
We offer 1mm, 2mm and 3mm Novafloor Protection options. Confirm the intended application and any technical requirements before choosing a thickness.
One standard listed Novafloor Protection roll measures 1.16 metres wide by 12 metres long.
This provides a nominal material area of 13.92m², or approximately 150 sq ft. Allow additional material for cutting, overlaps and irregular layouts.
Potential reuse depends on the material's condition, cleanliness, previous exposure and the requirements of the next project.
Inspect the material carefully and confirm the relevant product guidance before considering reuse. Do not assume a guaranteed number of uses.
Ready-stock supply does not automatically establish availability for every thickness, quantity or delivery date.
Contact us with your preferred specification, required quantity and delivery schedule so we can confirm the arrangements for your order.
Choose the Right Floor Protection Supplier for Your Project
In summary, choosing a floor protection sheet supplier in Malaysia starts with understanding the material construction, thickness, roll dimensions, coverage and actual project requirements.
Our Novafloor Protection range includes 1mm, 2mm and 3mm temporary floor protection rolls with a listed size of 1,160mm × 12m and approximately 150 sq ft of nominal coverage per roll.
For accurate purchasing, measure the areas requiring protection, account for installation allowances, review accessory requirements and confirm product suitability before ordering.
We welcome enquiries from contractors, interior designers, flooring companies, developers and renovation buyers looking for floor protection materials in Malaysia.
Get a Floor Protection Quotation from Novafloor
Tell us about your project, required floor protection area, preferred thickness and delivery requirements.
Our team can assist with enquiries about our protection rolls, accessories and ordering arrangements.
Contact Novafloor Protection