4.6mm NanoSPC vs 6mm SPC vs 8+2mm LamiSPC: What Should You Compare?
When comparing 4.6mm vs 6mm SPC flooring with our 8+2mm LamiSPC range, there is no defensible winner based on total thickness alone. Our published options differ in thickness labels, plank dimensions and carton coverage.
The suitable choice depends on your project's floor-height allowance, intended room use, preferred appearance and complete product specifications, particularly the wear layer, backing and installation requirements.
This guide helps interior designers, contractors, developers and flooring businesses in Selangor and across Malaysia compare our three ranges before approving a particular flooring design code.
Explore Our 4.6mm NanoSPC Range
Our NFS469 Grey Clio Oak design is one of the décor choices in the 4.6mm NanoSPC collection. Décor appearance and technical suitability should be assessed separately.
Quick Answer: Which SPC Flooring Thickness Should You Choose?
Start with the site requirements, not the thickness ranking. Our 4.6mm NanoSPC and 6mm SPC ranges use 1220 Ă— 184mm planks, while our 8+2mm LamiSPC range uses 1500 Ă— 230mm planks. Each range also has a different carton quantity and published coverage.
For a sound specification decision, confirm the selected design code's complete construction, wear-layer details, backing, installation guidance and suitability for the intended space before comparing the complete project offer.
What Is the Published Difference Between Our Three Ranges?
Our three interlocking flooring collections have different published thickness labels, plank sizes and packing quantities. These are useful starting points for product selection, layout planning and preliminary material estimation.
| Flooring Range | Stated Thickness | Plank Size | Pieces / Carton | Coverage / Carton |
|---|---|---|---|---|
| 4.6mm NanoSPC View designs | 4.6mm (±0.1mm) | 1220 × 184mm | 10 planks | 24.16 sq ft |
| 6mm SPC View designs | 6mm (±0.1mm) | 1220 × 184mm | 8 planks | 19.33 sq ft |
| 8+2mm LamiSPC View designs | 8+2mm (±0.1mm) | 1500 × 230mm | 4 planks | 14.85 sq ft |
Measurements and coverage are the stated product-range specifications. The 8+2mm designation is reproduced as listed; its individual construction layers must be confirmed using the relevant technical information.
What Can Buyers Conclude From This Table?
The 4.6mm and 6mm collections share the same published plank footprint, but their stated board thickness and pieces per carton differ.
LamiSPC has a longer and wider published plank format, so it should also be compared for visual layout, room proportions, cutting arrangements and floor-height coordination.
These figures establish dimensions and packing, not surface durability. Total thickness should not be substituted for a verified wear-layer specification.
Our Recommendation
Use the published dimensions to narrow your shortlist. Then review the exact décor code and supporting technical details before approving it for a project.
Why Does Total Thickness Not Answer the Wear Question?
SPC flooring thickness, protective wear-layer thickness and backing construction are different technical measurements. They should be assessed independently.
Total thickness describes the overall board build or published product designation. The protective wear layer is the surface component relevant to everyday wear, while backing, where included, is another construction element that can affect installation and floor performance.
A thicker total board does not automatically prove better scratch resistance, abrasion resistance or a longer service life. Those comparisons require product-specific evidence.
Which Technical Specifications Matter?
- Wear-layer thickness: confirm the measurement for the selected design code.
- Surface construction: review any documented protective coating and relevant performance testing.
- Backing: establish whether backing is included and its material, thickness and installation requirements.
- Overall build: check how the stated thickness is defined in the technical sheet.
- Installation conditions: confirm subfloor requirements and any additional preparation specified for the product.
Understanding Flooring Measurements
Conceptual layer diagram — not a verified construction drawing for any specific NovaFloor range.
The number and composition of actual product layers may differ. Do not interpret the published “8+2mm” label as proof of a particular core-and-underlay construction.
How Do Floor Height and Plank Format Change the Choice?
Floor-height allowance and plank dimensions affect practical installation planning as well as visual presentation. For renovation and new-build projects in Malaysia, both should be checked before confirming the chosen range.
Door Clearance and Thresholds
Measure the available finished-floor height and check door swing clearance, entrance details, adjoining rooms and threshold transitions. Account for the complete proposed flooring assembly, not just a label on the carton.
Existing Skirting and Adjacent Finishes
Consider existing skirting, fixed joinery, built-in cabinets, floor trims and connections to tiles or other finished surfaces. These details can influence preparation and finishing work.
Plank Format and Room Appearance
Our 4.6mm NanoSPC and 6mm SPC use the published 1220 Ă— 184mm plank format. The 1500 Ă— 230mm LamiSPC format has a larger individual plank footprint.
The format can influence the visible layout, joint pattern, cutting arrangement and relationship with the room's proportions. Review the design against the actual floor plan.
Subfloor Condition
A greater board thickness must not be treated as a substitute for subfloor assessment or preparation. Confirm the required flatness, moisture conditions and other installation tolerances for the selected product.
Planning Tip for Contractors
Record the measured floor-height allowance, current subfloor condition and expected final surface level. Compare those measurements against the complete product build and installation specifications before approval.
What Should Be Checked for the Intended Room or Traffic Level?
A general product usage list is a starting point, not proof that every design is suitable for every building. The specification decision should reflect the room's actual operating conditions and any applicable project requirements.
For homes, offices, schools, retail areas and commercial spaces, evaluate expected traffic, cleaning practices, movement of furniture or equipment, and the surrounding environment.
Residential Interiors
Consider the room's use, furniture arrangement, cleaning routine, design preference, existing floor levels and installation conditions.
Confirm the selected code's technical specification instead of assuming that a thicker option is automatically the most appropriate.
Offices and Commercial Areas
Evaluate foot traffic, furniture movement, rolling loads where relevant, ongoing maintenance and the required wear-performance evidence.
Check whether the selected product has the supporting documentation required by the project specification.
What About Schools, Retail Premises and Public Buildings?
These environments may have different requirements for slip performance, fire performance, maintenance and installation conditions.
The requirements should be established for the specific building and checked against the exact product's evidence. We would not recommend approving a flooring range for such requirements from total board thickness alone.
Minimum Verification Before Approval
- Exact product and décor code.
- Wear-layer specification and relevant tests.
- Backing and complete construction.
- Applicable fire or slip requirements.
- Installation and subfloor guidance.
- Maintenance instructions and project constraints.
How Do Carton Sizes Affect a Side-by-Side Comparison?
Our three ranges have different published carton coverage values: 24.16 sq ft for 4.6mm NanoSPC, 19.33 sq ft for 6mm SPC and 14.85 sq ft for 8+2mm LamiSPC.
To compare quantities fairly, calculate each option using its own carton coverage. Do not apply the packing quantity from one range to another.
How to Estimate the Number of Cartons
Measure the Required Floor Area
Use the project's measured layout and calculate the net flooring area in square feet. Identify irregular rooms or separate zones.
Select the Correct Range Coverage
Divide the measured area by the published square feet per carton for the chosen range.
Round Up to Whole Cartons
Round up the result because flooring is ordered in full cartons for this estimate.
Allow for the Actual Layout
Ask the installer to establish a suitable cutting and wastage allowance based on the plank direction, room geometry, installation pattern and project conditions.
100 sq ft of Net Floor Area
The following estimates use each range's published carton coverage, before any cutting or wastage allowance.
100 ÷ 24.16 = 4.14 → 5 cartons
100 ÷ 19.33 = 5.17 → 6 cartons
100 ÷ 14.85 = 6.73 → 7 cartons
These figures are preliminary whole-carton estimates, not a confirmed order quantity. The installer must account for the final layout and any required cutting allowance.
Compare Complete Project Costs, Not Carton Counts Alone
A range requiring more cartons is not necessarily the more expensive project option. Compare the complete quotation, including the selected product, required quantities, subfloor preparation, accessories, delivery, installation scope and any exclusions.
Why Should You Compare the Actual Flooring Design Code?
Thickness is only one part of the specification. The selected décor also matters because the floor's colour, grain pattern and visual texture influence how it works with walls, furniture, lighting and the overall interior concept.
For example, our NanoSPC collection includes NFS469 Grey Clio Oak and NFS462 Light Rosen Maple. Their different visual tones demonstrate why buyers should review a specific design rather than choose only a thickness category.
A physical sample, if available, may help assess colour and surface appearance under the project's lighting conditions. It does not replace a technical sheet or a proper assessment of site requirements.
You can review design codes in our 4.6mm NanoSPC collection , 6mm SPC collection and 8+2mm LamiSPC collection .
What Should You Ask Before Approving a Specific Design Code?
Before confirming an SPC flooring order, prepare a short product and site checklist. This makes it easier to identify missing details, compare quotations and avoid selecting a range on thickness alone.
-
Chosen range and décor code
Confirm the exact NanoSPC, SPC or LamiSPC selection, including the published product code. -
Complete thickness and construction
Request a clear breakdown of the actual flooring assembly, including confirmation of the “8+2mm” designation where applicable. -
Wear layer and backing specification
Review the selected code's protective wear-layer details, backing construction and relevant performance documentation. -
Actual site conditions
Provide the proposed room use, measured floor-height allowance, existing floor condition and any special installation requirements. -
Carton quantity and layout
Check published coverage, preliminary carton quantities and the cutting allowance set by the installer. -
Current stock and lead time
Confirm availability for the exact design code, the required number of cartons and the intended project schedule.
What to Send Our Team
To discuss your shortlisted flooring options, it helps to provide:
- Preferred flooring range.
- Selected décor code.
- Project location.
- Room or building use.
- Estimated floor area.
- Available finished-floor height.
- Relevant drawings or site conditions.
- Required delivery or project timeline.
We can discuss the outstanding product-specific details and help you identify what needs confirmation before the final decision.
Contact Our TeamFrequently Asked Questions About SPC Flooring Thickness
Is 6mm SPC flooring always better than 4.6mm SPC flooring?
No. Our 6mm SPC range has a greater published total thickness than our 4.6mm NanoSPC range, but that alone does not establish superior wear resistance or suitability. Compare the exact product specifications, site conditions and installation requirements.
Does 8+2mm LamiSPC mean 8mm flooring with a 2mm underlay?
The published product designation is 8+2mm (±0.1mm). Do not assume the individual layers or backing construction from this label. Confirm the complete product build using the relevant technical information.
Do the three flooring ranges have the same plank size?
No. Our 4.6mm NanoSPC and 6mm SPC ranges list 1220 Ă— 184mm planks. Our 8+2mm LamiSPC range lists larger 1500 Ă— 230mm planks. This difference matters for flooring layout and quantity planning.
How many square feet are covered by one carton?
Our published coverage is 24.16 sq ft per carton for 4.6mm NanoSPC, 19.33 sq ft for 6mm SPC and 14.85 sq ft for 8+2mm LamiSPC. Allow for the installer's cutting and wastage calculations when preparing a final order.
Can thicker SPC flooring be installed over an uneven subfloor?
Greater thickness does not establish that a flooring product can accommodate an uneven subfloor. The surface must be assessed against the selected product's installation and subfloor preparation requirements before installation.
Choosing Between Our NanoSPC, SPC and LamiSPC Ranges
In summary, the most useful way to compare our 4.6mm NanoSPC, 6mm SPC and 8+2mm LamiSPC ranges is to begin with their stated thickness, plank dimensions and coverage per carton, then verify the performance and installation specifications for the chosen design code.
A complete comparison of SPC flooring thickness in Malaysia should consider floor-height limitations, room suitability, wear-layer details, backing construction, plank format and the complete project scope.
There is no need to select the thickest published option automatically. The stronger decision is the one supported by the correct technical information and the actual project requirements.
Need Help Comparing the Right SPC Flooring Range?
Share your preferred NanoSPC, SPC or LamiSPC range, selected design code, project use and available floor-height allowance. Our team can discuss the product details that need confirmation for your project.
Whether you are planning a residential interior, office, retail space or larger development in Selangor or elsewhere in Malaysia, starting with accurate specifications helps create a clearer flooring shortlist.
Include your selected design code, estimated floor area and project requirements for a more focused enquiry.